Engineered wood for every role in construction

Whatever your role in construction is, the structural decisions you make affect project timeline and cost.

Kerto® LVL is designed to make those decisions easier. It performs consistently in factory production and on site, comes with full certification documentation and stores carbon throughout the building's lifetime.

 

25 m

~70%

±1 mm

40+

Maximum clear span with Kerto LVL products Lower carbon vs steel or concrete Dimensional tolerance for factory production Countries where Kerto LVL is in use

Structural engineers & designers

Specify with confidence — the documentation is ready

Structural engineers need certified design values, verified documentation and a material that behaves exactly as the calculations predict. Kerto LVL eliminates the challenges common to alternative wood products, including inconsistent density, grain variation and dimensional instability. Every piece is engineered to perform the same, making it well suited for both structural frames and prefabricated elements. All Kerto LVL products arrive precisely dimensioned and hold their geometry throughout the building's lifetime.

  • ETA approvals and Eurocode design values.
    Full European Technical Assessment documentation is available for all Kerto LVL products, accepted by building authorities across Europe and the UK (UKCA).
  • BIM objects and calculation tools.
    Kerto LVL products are available directly in several leading building design software and product library tools. Finnwood software helps calculate different Kerto LVL structures.
  • Consistent mechanical properties.
    Unlike solid timber, Kerto LVL has no natural defects. The design values you calculate with are the values you get on site, every time.
  • Design freedom in complex geometries.
    Kerto LVL is available in custom lengths up to 25 m and can be machined to complex shapes, enabling curved structures, large openings and non-standard spans.
  • Fire performance documented.
    Charring rate data and fire design guides are available for use with Eurocode 5. Kerto LVL performs predictably in fire, which is critical for multi-storey residential and commercial projects.

Solutions for structural engineers & designers

Read more

Element manufacturers

A structural material built for factory production

Prefab element manufacturers depend on material consistency. Machining rejects, assembly rework and production delays often trace back to variability in the raw material. Every piece of Kerto LVL is engineered to the same density and dimensional accuracy, batch after batch. Its strength-to-weight ratio makes it equally well suited for volumetric modules that need to arrive perfectly square and hold their geometry through transport and installation. Each cubic metre also stores 783 kg of CO₂, supporting the embodied carbon calculations your clients increasingly require at planning and handover.

  • Predictable in automated lines.
    Kerto LVL has consistent density throughout, with no knots or grain variation, so your CNC and router produce the same result on every piece. Fewer rejects, faster throughput.
  • Dimensionally stable from factory to site.
    Tight tolerances (±1 mm) mean elements arrive fitting as designed, with no costly site adjustments or delays waiting for corrections.
  • Longer spans, slimmer profiles.
    Kerto LVL S-beam spans up to 25 m, allowing designs with fewer columns and more usable floor area without increasing structural depth.
  • Reliable supply from European mills.
    Our Finnish and Estonian mills operate to consistent quality standards, with delivery schedules you can plan a production calendar around.
  • Full documentation included.
    CE markings, ETAs and product datasheets ship with every order, ready for your quality system and your customers' project documentation.

Solutions for Element manufacturers

Read more

Builders & contractors

Less time on site, fewer complications at handover

Builders and general contractors need a structural system that installs quickly, requires less labour on site and is cost-efficient. Project timeline overruns often start with on-site adjustments, wet trade delays and rework. Kerto LVL elements are designed to arrive right first time, keeping the schedule tight and reducing the need for on-site cutting. Because Kerto LVL is light relative to its structural performance, large-span elements can often be handled with a smaller mobile crane and fewer operatives, which cuts preliminaries on tight urban sites. Contractors are also seeing more RFPs that specify embodied carbon targets or require BREEAM/LEED credits. Kerto LVL is one of the most straightforward ways to meet these requirements without adding project timeline risk.

  • Lighter than concrete, faster to install.
    Kerto LVL elements weigh a fraction of equivalent concrete, enabling smaller cranes, smaller crews and faster floor cycles. Typical timber-frame floor schedules run 30–40% faster than concrete equivalents.
  • Arrives cut to length, ready to install.
    Prefabricated Kerto LVL elements arrive on site dimensioned to the design. No wet trades waiting, no cutting to fit, reducing project timeline risk and waste.
  • Dry construction, earlier fit-out start.
    Timber-frame construction using Kerto LVL is a dry process. Fit-out trades can follow closely behind the structure rather than waiting for concrete to cure.
  • Consistent site performance.
    Engineered to tight tolerances, Kerto LVL elements sit square, plumb and true, resulting in fewer remedial works and less snagging at handover.
  • Traceable and certified.
    Every piece carries CE marking and provenance documentation, which is useful when clients, funders or building control ask questions at handover.

Solutions for builders & contractors

Read more

Investors & developers

Build and sell faster, maximise every floor with ESG targets

As property developers and investors make decisions about structural systems based on project timeline, return on investment and positioning, Kerto LVL improves the numbers across all three. On a 40-unit residential scheme, a three-month saving can be worth hundreds of thousands before earlier sales revenue is factored in. Real estate funds and corporate occupiers are increasingly screening assets by embodied carbon, and buildings with verifiable low-carbon structures are ahead of incoming regulatory requirements across Europe. Planning authorities in Scandinavia, the UK, France and Central Europe also view mass timber favourably in the context of net-zero targets, which can influence approval timescales and conditions.

  • Shorter construction schedule, earlier revenue.
    Timber-frame structures built with Kerto LVL typically complete 20–30% faster than concrete equivalents, which means earlier practical completion and earlier sales or rental income.
  • More sellable area per floor.
    Slimmer structural profiles compared to concrete mean more net sellable or lettable area within the same gross floor area. This is particularly valuable in mid-rise residential and office developments.
  • Additional storeys on existing structures.
    Kerto LVL's strength-to-weight ratio makes rooftop extensions and additional floors feasible on existing buildings where a concrete superstructure would be too heavy for the existing foundations.
  • Green building certification.
    Timber structures qualify for credits under BREEAM, LEED and other recognised schemes, supporting planning applications, ESG reporting and differentiation with sustainability-conscious tenants and buyers.
  • Biophilic appeal and premium positioning. 
    Exposed timber interiors command rental and sales premiums in residential, hospitality and office markets. Kerto LVL can be left exposed where the design calls for it.

Solutions for investors & developers

Read more