±1 mm Dimensional tolerance. Consistent batch to batch
|
25 m Maximum element span with Kerto LVL S-beam
|
~20% Lighter structures vs equivalent solid timber sections
|
CNC |

±1 mm Dimensional tolerance. Consistent batch to batch
|
25 m Maximum element span with Kerto LVL S-beam
|
~20% Lighter structures vs equivalent solid timber sections
|
CNC |
Identical piece-to-piece consistency
Kerto LVL has no knots, grain variation or natural defects. Every piece performs to the same engineered values. Your CNC and routing equipment produce the same result on every run. Fewer rejects, less rework, faster throughput.
Dimensional accuracy from factory to site
Manufactured to tight tolerances (±1 mm), Kerto LVL elements arrive on site fitting as designed. No time is lost to adjustments, corrections or waiting for re-cuts.
Spans up to 25 m with fewer columns
Kerto S-beam spans up to 25 m without intermediate support. For residential and commercial element systems, this means fewer columns, more open floor plans and greater flexibility for your customers’ layouts.
Ideal for volumetric and modular construction
High strength-to-weight ratio and predictable geometry make Kerto LVL a natural choice for volumetric modules. Factory-built rooms and units need to arrive perfectly square and hold their geometry through transport and craning. Sawn timber introduces risk at exactly this point.
Full CE documentation ships with every order
CE markings, European Technical Assessments and product datasheets are included as standard. They slot straight into your quality management system and your customers’ project documentation without chasing paperwork.
Ready for automated production lines
Consistent density throughout the panel and beam means predictable tool loads, clean machining edges and no surprises from batch to batch. Kerto LVL is designed to work with modern prefab production equipment.
Carbon stored, not emitted
Each cubic metre of Kerto LVL stores 783 kg CO₂. This figure feeds directly into the embodied carbon calculations your customers increasingly require at planning and practical completion. It is verifiable through Environmental Product Declarations.

Kerto LVL (Laminated Veneer Lumber) is manufactured from 3 mm rotary-peeled, strength-graded softwood veneers bonded with weather-resistant phenol formaldehyde adhesive. Unlike sawn timber, natural defects are distributed randomly across the cross-section rather than concentrated in any single lamination — producing a material that is significantly more homogeneous and predictable than conventional lumber or glulam.
This homogeneity is what gives Kerto LVL its structural advantage: the characteristic strength values you design to in Eurocode 5 are reliably achieved across the entire product, not just on average. The result is less conservatism in design, slimmer sections and lighter structures.
Kerto LVL is available in depths up to 2,500 mm and lengths up to 25 m as standard, enabling structural configurations that are not feasible with solid timber or glulam at equivalent section efficiency.