Design structures that are stronger, slimmer and lighter

Kerto® LVL gives structural engineers a material with reliably high and consistent strength properties, freedom to specify unusual dimensions, and full Eurocode compliance. Whether you are designing a long-span floor, a highly insulated roof or an entire prefabricated frame, Kerto LVL expands what is structurally achievable in wood.
 
LVL 48 P
Highest bending strength class for engineered wood beams
 
25 m
Maximum beam spans — open-plan without intermediate columns
EN 14374
Harmonised European standard — Eurocode 5 compliant
ETA
European Technical Assessment for all Kerto LVL products

Main reasons structural engineers and architects prefer Kerto LVL

Consistent, reliable strength values
Characteristic values are achieved across every piece — not just statistically on average. Homogeneous veneer construction eliminates the batch-to-batch variation that requires conservative safety factors with sawn timber.

Slim, tall section profiles
Available from 27 mm wide up to 75 mm thick and 2,500 mm deep. Thin, tall profiles not available in glulam — enabling structural depth to be used as insulation space rather than occupied by timber.

Full Eurocode 5 compliance
All Kerto LVL products are CE marked under EN 14374 with European Technical Assessments. Design directly in Eurocode 5 using published characteristic values. UKCA marking available for UK projects.

Excellent in fire
Kerto LVL chars at a predictable rate and retains a structural core. It can be designed for fire resistance using Eurocode 5 charring calculations, supporting exposed timber design in service class 1 and 2 environments.

Free calculation tools
Finnwood design software provides full structural calculations for beams, columns, wall studs and combined systems. Span tables cover the most common floor, wall and roof configurations across European climates.

Technical support
Our structural engineering team provides product guidance, connection design support and project-specific consultation. If your application falls outside standard tables, we work with you directly to find a solution.

Kerto LVL makes the difference

Kerto LVL (Laminated Veneer Lumber) is manufactured from 3 mm rotary-peeled, strength-graded softwood veneers bonded with weather-resistant phenol formaldehyde adhesive. Unlike sawn timber, natural defects are distributed randomly across the cross-section rather than concentrated in any single lamination — producing a material that is significantly more homogeneous and predictable than conventional lumber or glulam.

This homogeneity is what gives Kerto LVL its structural advantage: the characteristic strength values you design to in Eurocode 5 are reliably achieved across the entire product, not just on average. The result is less conservatism in design, slimmer sections and lighter structures.

Kerto LVL is available in depths up to 2,500 mm and lengths up to 25 m as standard, enabling structural configurations that are not feasible with solid timber or glulam at equivalent section efficiency.

Explore Kerto LVL products